+44 (8)442 111 422

info@aquaread.com

Enquiry Form

How-tos

AP-7000 Brush Install – published on Feb 28, 2014

In this video, we show you how to install the AP-7000 brushes. The AP-7000 Aquaprobe is designed for lengthy periods of unmanned water monitoring in the field. The brushes perform the self-cleaning function. You’ll see in the video that the wiper arm brushes clean each of the terminals in turn.

Our water testing equipment is used for a wide range of applications including long term environmental monitoring in rivers. To learn more about the AP-7000 and our other products, visit our website.

Fitting the sleeve – published on Feb 28, 2014

This video from Aquaread shows you how to fit the sleeve and end cap to the probe. The water testing equipment shown in the video is the AP-7000, one of our multiparameter probes. The sleeve is necessary to protect the electrodes that you have fitted to the probe, and the end cap must be used with optical electrodes to prevent distorted data caused by UV. Once the sleeve and end cap are fitted, you are ready to calibrate the probe.

ISE Sensor Install – published on Feb 28, 2014

See how to install an ISE electrode into an Aquaread Aquaprobe. The water testing equipment shown in the video is the AP-7000, and the electrode being installed is the fluoride ISE.

The video demonstrates how to insert the electrode and set up the meter so that it’s recognised. Aquaread multiparameter equipment is used in a variety of water quality testing applications. One of the uses for a water quality meter is for monitoring the water discharged from industry.

Optical Electrode Install and socket assignment – published on Feb 28, 2014

Watch how to install an optical electrode into the AP-7000 probe. This multiparameter water quality meter from Aquaread has 6 auxiliary ports that accept both ISE and optical electrodes, so you can configure your water testing equipment to measure the parameters that you need. The electrode being inserted in this video is the turbidity optical electrode.

Aquaread products are designed for use in the field and are used in scientific research, industry and various other purposes.

Combi Electrode install – published on Feb 28, 2014

In this video from Aquaread, watch a demonstration of combi electrode installation. The combi electrode measures pH and ORP (oxygen reduction potential). ORP is a measure of the potential for reduction chemical reactions to take place. It’s a standard parameter included with the AP-7000 probe (shown in the video), AP-5000 and AP-2000.

Aquaread multiparameter water quality meters are used for a wide range of applications including water monitoring at wastewater treatment plants; the higher the OPR at the end of the process, the cleaner the water.

Comments are closed.

Aquaread® - Community Trade Mark Registration No. 011713815
Aquaread® - Australia Trade Mark Registration No. 1436803
LeveLine® - Community Trade Mark Registration No. 011713823
Aquaprobe® - UK Trade Mark Registration No. 00003000628
Aquameter® - UK Trade Mark Registration No. 00003000627
LoggerLink® - UK Trade Mark Registration No. 3081814
Leveline-CTD® - Community Trade Mark Registration No. 016187338

Download Aquaread's Terms & Conditions
Download Aquaread's Environmental Policy
Download Aquaread's Green Procurement Policy
Download Aquaread's Quality Policy

ISO certification for ISO 9001 and 14001