Nitrate Water Sensor

What is Nitrate?

Nitrate (NO3) is a compound that contains nitrogen and oxygen and is known as a salt. Nitrogen is released by decomposing material such as plants, human and animal wastes.

Nitrates are essential for plant growth as they facilitate the production of amino acids and proteins. Nitrate is highly water soluble and excess nitrate, not used by plants, can leach through soil into groundwater.

Aquaread Nitrate Sensor.

The Nitrate sensor is an Ion Selective Electrode (ISE). It measures charged nitrate ions found in the water.

Nitrate

Key Features

  • Solid state ISE sensor.
  • Nitrate Measurement range 0 – 30,000mg/l.
  • Nitrate Resolution: two auto range scales: 0.00 – 99.9mg/l, 100.0 – 29,999.9mg/l.
  • Nitrate Accuracy: +/- 10% of reading.
  • Simple to install on a wide range of Aquaprobes.
  • Sensor life of around 6 months depending on usage.
  • Long storage shelf life.

Our Nitrate sensors can be fitted on many of our probes, below are some examples.

To see all of the probes that feature nitrate please visit the Products section

AP-2000

AP-2000

Advanced portable multi-parameter Aquaprobe.

Read More
Aquasonde-2000

Aquasonde-2000

The Aquasonde-2000 has 2 spare ports. They can house either 1x ISE sensor and 1x Optical sensor. Or it can house 2x ISE sensor.

Read More
AP-5000

AP-5000

Advanced portable multi-parameter Aquaprobe.

Read More

Solid State Sensor

This is a solid state sensor in that it is not gel filled, the advantage of this kind of sensor over those offered by other manufacturers is that the sensor will not deteriorate over time so long as its dry. A new dry sensor can be stored for years without degradation. Gel filled sensors are different and have a finite life from the point of manufacture.

Calibration and Temperature

Successful calibration of an ISE is fairly complex. On its initial use, a three-point calibration is required. Generally, this is at 10ppm and 100ppm of the sensor’s specific calibration solution, with the third point intended to characterise the effect of temperature on that specific sensor. The third point is a second calibration at 10ppm however, this calibration point must be at least 10 degrees colder than the initial point. This is because the measured concentration varies with temperature as well as the actual concentration of the ion.

The good news is that once this calibration is complete, subsequent calibrations do not require the third point to be re-done making future calibrations much simpler to perform.

Limitations

An ideal ISE sensor would only allow the ion in question to be passed through the membrane. However, in practise all ion selective electrodes suffer from interference from ions which are similar in nature to the target ion. For this reason, ISE Electrodes are not recommended for use in brackish or salt water due to the high level of interfering ions.

Simple installation

Installing the nitrate sensor into an Aquaprobe is a very simple process. Simply unscrew the blanking plug from an appropriate aux socket, apply some silicon grease to the thread of the sensor (grease provided) and screw in the sensor. After installation full calibration is required.