Software Downloads

Here at Aquaread we are proud to manufacture a wide range of scientific-quality water testing equipment, designed to work in all types of water and in even the harshest of conditions. However, we understand that to enable this equipment to perform water analysis tasks it needs high-level water testing software to complement it. If you’re undertaking water analysis using some of our Aquaread water testing equipment, including LevelLine, AquaLoggers and Aquameters, then download your required water testing software from the selection below. Click on the links for more information and to find the software necessary for your needs, and then download the relevant PC application. If you have any trouble finding the water testing software you need for your water testing equipment then get in touch and we’ll be happy to assist you.

AquaCal – Aquaprobe Live Data & Calibration Utility with Report Generation

  • Allows you to connect your Aquaprobe to a PC using the adaptor kit
  • View live readings from the Aquaprobe on your PC
  • Log data from the Aquaprobe on your PC
  • Fully calibrate your Aquaprobe without the need for an Aquameter
  • Produce calibration reports after calibration

Download AquaCal Here

Aquacal

AquaLink – PC software for Aquameter data retrieval and file storage

The AquaLink windows PC software comes free with every GPS Aquameter and it allows you to manage the data captured on your Aquameter in numerous ways.

AquaLink Features

  • Simple data download via button
  • Tick and un-tick datasets to customise your outputs
  • Output a text report for all highlighted data
  • Output data as a CSV file that you can open in Excel
  • Output data as a .KML file for use in Google Earth

Download AquaLink Here

Aquacal

AquaTelemetry Utility – Set up the AquaTelemetry device on your PC

Use the AquaTelemetry Windows PC Utility to set up your AquaTelemetry device using a PC.

The AquaTelemetry Utility allows you to set up your AquaTelemetry system before you deploy it in the field. With the AquaTelemetry device connected to your PC via USB, the settings below can be configured.

  • The AquaTelemetry unit’s real time clock (this is automatically updated every time the device connects to the mobile network)
  • An email account for data uploads (Primary contact who will manage the daily emails containing the collected data)
  • A mobile internet access point (Network access point information to allow connection to the SIM cards network)
  • Multiple SMS contact details (People who will receive alerts when triggered, up to 50 contacts can be added)

In addition the software allows you to download logged data currently saved on the device if network connection has failed.

Download AquaTelemetry Utility Here

Aquacal

LeveLink – PC software for LeveLine setup & data retrieval

The LeveLink windows PC software comes with every LeveLine PC-KIT. The software enables you to set up your logging schedule, manage barometric and water level data separately, and handle various data compensation options. Data can be exported into Excel for detailed graph manipulation and it can be exported as a Google file for use in Google Earth if GPS data is available.

LeveLink Setup Page

In the easy to use set up page you can give the LeveLine identity and location information, set up logging start dates and durations (where QuickDeplopy Key or LeveLine GPS meter are not used), set up event logging triggers and levels and also set the loggers date and time and units.

Aquacal

LeveLine-Baro Data Page

View captured barometric data on this page from a LeveLine-Baro or from saved data on your hard drive. Pressure and temperature data are displayed on a manipulatable graph and can be exported as a Google Earth file when GPS data is available or as an Excel file. GPS data can be manually entered or automatically captured when using the GPS LeveLine Meter.

Aquacal

LeveLine Level Data Page

View captured LeveLine data on this page. Captured pressure and temperature levels are displayed on the graph. You can zoom in on the graph by dragging a box over the area of interest for higher resolution on large datasets. Data can be exported as a Google Earth file when GPS data is available or as an Excel file. GPS data can be manually entered or automatically captured when using the GPS LeveLine Meter.

Aquacal

Corrected Data Page

This page allows you to perform various compensations on your data. For example, when you have collected both barometric and water pressure data using one of our absolute LeveLine loggers, it allows you to combine the data and output as level rather than as a pressure. You can also compensate against logged zero points when using the QuickDeploy Key or the GPS LeveLine Meter.

Aquacal

Download LeveLink Here

LoggerLink – PC software for AquaLogger setup and data retrieval

The LoggerLink windows PC software comes free with every AquaLogger, it allows you to set up logger behaviour and manage captured data in numerous ways.

LoggerLink PC Application

This simple application allows you to download captured data from your AquaLogger. Data can be viewed on screen, exported as an Excel file for graph generation, exported as a text report summarising the data or saved to your hard drive for use later on. You will also find the button for logger set up.

Aquacal

AquaLogger SetUp Button

Pressing the logger setup button opens a second window. Inside this window are various set up options. On the left of the window are the logger’s current settings, on the right is where you can enter your desired settings. Setting options include logging frequency, event trigger setting, the type of EC correction required and also date and time settings.

Aquacal

AquaLogger Text Report

The text report features a summary of all recorded data before listing every data set captured. It is ideal for reporting data that is required for filing.

Aquacal

Download LoggerLink here

OxiLink – PC software for AquaPlus meter data retrieval

The OxiLink windows PC software comes free with every GPS DO meter and it allows you to manage the data captured on your DO meter in numerous ways.

  • Simple data download via button
  • Tick and un-tick datasets to customise your outputs
  • Output a text report for all highlighted data
  • Output data as a CSV file that you can open in Excel
  • Output data as a .KML file for use in Google Earth

Download OxiLink Here

Aquacal

SondeLink – PC Software for Sonde data retrieval and logging setup

The SondeLink Windows PC software comes free with every AquaSonde and it allows you to manage the data captured on your AquaSonde, set up logging intervals and calibrate your sensors.

  • View live data
  • Calibrate the all of the attached sensors
  • Set up logging schedule
  • Output data as a CSV file that you can open in Excel
  • Output data as a .KML file for use in Google Earth

Download SondeLink Here

Aquacal